VULTURE – Part III – Airborne

Hang on, ’cause we’re airborne

“It was the silences, the long smooth silences which were the most scaring parts of the 80 mph speedboat ride. Because when it went quiet like that, the 17ft, clinker built racer was airborne, completely airborne”.

VULTURE Part III – ‘Airborne’– By Bindy Lewis (an extract from a 1970 publication )
VULTURE – owner/driver: John Lewis
VULTURE HULL – boat builder/design & modifications: David Gill (GILFLITE)
ARTICLE CREDIT: De Fraga, C., 1970, ‘Hang on, cause we’re airborne’, The Age, Saturday, Sept. 12, p. 66.
The fuel injected 580 bhp racer, Vulture, was only travelling at about 60 mph here (pictured) – but while owner/driver John Lewis is unconcerned, I’m having trouble with the wind trying to lift off my face visor and crash hat.

IT WAS the silences, the long smooth silences which were the most scaring parts of the 80 mph speedboat ride along Albert Park Lake past the Carousal Restaurant.
Because when it went quiet like that, the 17 ft. clinker built racer was airborne, completely airborne.

And when it came down, it usually came down at an angle because there was a strong north wind blowing. So one side would almost bury itself into the steep chop and the boat would skid before launching itself again.

Another two or three of those tall poplars would go past (along the banks of Albert Park Lake) before the boat touched down again. My view of the water and waves rushing up was blurred by the vibration shaking the visor on my crash hat, the wind trying to tear the visor off, the weight of the crash hat jerking my head at each hound.

There was no windshield on the boat because this would have increased aerodynamic drag.

Behind, the 353 cu. in. Corvette V8 motor – all fuel injection and fury – churned out its 580 bhp with straight exhausts bellowing news of the power over at least two suburbs. There was a passenger’s grab handle on the dashboard of John Lewis’ Vulture and forever it will bear my fingerprints.

At more than 80 mph, the boat thudded, thumped and crashed its way down the lake with those short, terrifying flights in between. Part of the problem was my own 147lbs. In the cockpit with Lewis. He’s used to racing alone and my weight was causing too much of a nose down attitude.

After the first long run down the lake, Lewis said, “It’s misfiring a little. That was only about 85 mph.” He’s driven it at more than 90 mph.

For last week’s ride the boat had a new propeller and this wasn’t as good as expected.

With the form moulded fibreglass seats in the cockpit the ride wasn’t too bad, certainly not as bad as it must have looked from the shore as the boat leapt and roared along.

Up around 60 mph, there was a little of the porpoising often seen in clinker speedboats at high speed. Then the hull shape of Lewis’ boat took over and the ride smoothed out for the run up to the 80’s. The boat handled in a rather similar fashion to touring car set up for racetrack work. There was either under or over-steer bends and there was always plenty of response to the helm.

Lifting off the accelerator killed speed faster that brakes on a car seem to and the boat could be slid round corners in the Albert Park Lake speedboat racing course.

The wind greatly affected the boat’s cornering since an exposed hull at those speeds created considerable lift and reduced stability. But on a straight run the boat ran so true it hadn’t felt like more than 80 mph. Just the same when I climbed out I was exhausted from holding my self in the seat.

Lewis now holds three Australian and five Victorian records with the boat apart from several championships. And all these have come in just one year’s racing.

The boat was to have made an attempt on the kilo records again at Eppalock last weekend but only reached 88.5 mph due to weather. “She should do about 96 mph flat out at 6000 rpm” said the 28-year-old who has been driving speedboats for 10 years. Vulture will be the boat to beat at thee opening of the speedboat racing season next Sunday. More than 25 speedboats are expected at Albert Park Lake for the 1 p.m. opening of the Victorian Speed boat Association’s 1970-71 racing season.

The opening should provide thrills, for it will be the first time that the course has been raced anti-clock wise. The field should be bunched on the first turn at the end of the main straight, the tightest turn of the course.
Anti-clockwise racing will be the rule in Australia for the coming season.
“Wake piece: Suits me, the boat turns left naturally,” said Lewis.

(De Fraga, C., 1970, ‘Hang on, cause we’re airborne’, The Age, Saturday, Sept. 12, p. 66.)
VULTURE holds three Australian and five Victorian records
VULTURE – airborne on Albert Park Lake (Melbourne) circa 1970

VULTURE – Part II ‘The Build’

VULTURE PART II – ‘The Build’ – By Bindy Lewis (an extract from a 1970 publication)
VULTURE HULL – boat builder/design & modifications: David Gill (GILFLITE)
VULTURE – owner/driver: John Lewis

Construction began in, Dave’s Croydon boathouse early in 1969. Original plans called for the engine to sit right aft against the tuck. The boat had to be able to handle any water and be stable. After observing the movements of other rear-engine’d boats and thinking of the undesirable kiting of these boats, the 283 cubic inch Chevvey was moved forward about 18 inches with the result that the boat was better balanced and had a seven-degree shaft angle. A small seat was fitted aft of the engine to allow a daredevil passenger to suffer during championships. Early trials resulted in the usual collection of broken quadrants and shafts, but the boat settled down well.

At the Victorian championships at Learmonth ‘last year’, Vulture showed up well by leading the way around the first lap nearly evertime. Unfortunately, the throttle cable played up all day and at times John had to steer with his right hand while working the injection with the other.

Extract: Andrews, G., 1970, ‘Whos Who in the Pits’, Power Boat & Yachting, May, p. 49

VULTURE – Part I ‘Introduction’

‘VULTURE is the first Australian – built conventionally-hulled boat to do the “ton” !!
John Lewis won more National and State championships and broke more records than he could paint on VULTURES deck’. (Ted Madden)

VULTURE PART I – ‘Introduction’ – By Bindy Lewis

VULTURE – owner driver: John Lewis

HULL – David Gill

Story by Bindy Lewis (Johns daughter)

‘VULTURE is the first Australian – built conventionally-hulled boat to do the “ton” !!
John Lewis won more National and State championships and broke more records than he could paint on VULTURES deck’. (Ted Madden)

I was only 2 years old when My dad ‘John Lewis’ started ‘Speedboat Racing’.  Dad had some history in boats but not in building a race boat! and Dad wanted a winner – he was all or nothing. This boat had to be special!  

Dad went to see a local boat builder in Croydon, Dave Gill for the hull.  He also approached a bloke by the name of John Peet, a motor mechanic who lived in the same block of flats.  John Peet said he knew nothing about boats, but Dad did not see this as a problem.  

David Gill finished the timber hull and presented John with a ‘one of a kind design’ – She was a beauty and of highest standards in this craft.  John & his brother Geoff with John Peet set about fitting the engine.  This was in the  late 1960’s  – there were no big flash Auto Parts Stores where you could source what was needed for a race boat.  John had to have parts machined for him, they had to go about all different tasks by being inventive. It was a matter of adapting what you had, have it made or make it yourself – and go looking overseas to America, and importing your own parts.  Dad was always busy, running ‘Lewis Bros’ Plumbing and spending as much time as he could on his new toy  “Vulture”.

The 1970’s was a huge & exhilarating time in boat racing history. The sport was ‘big time’ with bigger and faster boats appearing on the scene.  It was a time when the boat racing phenomenon  was a massive part of Australian Sport!  Acknowledged by the media both in print & on television. They were very exciting times, records were being broken and teams were experimenting like never before.  The enthusiastic crowds were huge!

Camping was popular, making race meets a family affair and a big weekend was made of it.  Dad decked out an interstate coach, “Clipper” Bus for Mum & us three kids – it had everything! I will never forget Dad and the generator he had going full boar while complaining how hot it was, lol! The reason John, my Dad, decked out the Clipper is because he went to every possible race meet and it was way easier for Mum with us kids.  Dad was consistent, always racing, and there were a lot of race meets to attend.

I was so little, I didn’t know about winning, I was too young, (or I was incapable of having the attention span to watch an entire race). What was important to me was that Dad got to the corner first and that the boat did not break. I would ask “Did the boat run out of petrol?”
That was what I thought a break down was ?

Bindy’s Speedboat Racing tips:
1. Get to the corner first
2. Have plenty of petrol


Thanks for listening,

Bindy


Epilogue: ‘Vulture is the first Australian – built conventionally-hulled boat to do the “ton” !!
John Lewis won more National and State championships and broke more records than he could paint on VULTURES deck’. (Ted Madden)

Check out Bindy’s web site featuring her Dad ‘John Lewis’ and VULTURE

GILFLITE

22nd April 2020

GILFLITE Trademark

Our aim is to protect the integrity of the brand ‘GILFLITE’ to ensure the GILFLITE Quality Guarantee! With respect for the trust that our customers invest into our products and service we would like to clarify the following;

We support the interaction of the GILFLITE owners (and all boat owners) on our social media platforms. However, to avoid confusing unauthorised product endorsement by GILFLITE, we request that advertising and promotion of other marine business under the banner of GILFLITE without prior arrangement be abstained. (Please do not advertise under the name of GILFLITE without first requesting permission).

We encourage communication of your vast knowledge and experience with boats on all levels and most of all the  freedom to express  ideas and opinions during discussions on our social media platforms but bear in mind some people have more experience than others so please be respectful to each other and the GILFLITE brand. We ask that you refrain from negativity, false/misleading allegations, and or bullying.

Note: We appreciate and encourage the valuable sharing of information and the immense collective knowledge (including opinions and experience) on the GILFLITE product. However, at this stage, we have not authenticated any participant on social media or individual in the marketplace to be an authority on the GILFLITE product, if in doubt please contact the manufacturer.

On the rare occasion a social media post may be deleted, or a member temporarily banned or tagged with ‘pre-approval of a post’, please be assured that the reason is only for breach of the above request. Let’s keep a good vibe going around GILFLITE! And if you are not happy with something let us know. 

GILFLITE is a registered trademark under the Australian Intellectual Property Law act.

Happy and Safe Boating!

SPITFIRE by Bob Carter

Gilflite Spitfire

By Bob Carter

Performance Boat editor

PowerBoat Magazine

“Through my involvement in power boat racing and the VSBC, (Victorian Speed Boat Club), I had the highest respect for Dave Gill as a boat builder who had a flair for designing fast and successful race boats plus the skill as a timber boat builder to turn out amazing race boats.”

David and Kevin Gill founded GILFLITE on the background of building some of the countries fastest and best designed race boats, but eventually they were destined to become one of Australia’s foremost fibreglass ski boat manufacturers.  In December 1979 the Gilflite fibreglass production ski-boat, ‘Spitfire’, graced the cover of Australian Powerboat magazine.  According to my article, brothers David and Kevin Gill designed the hull in December 1976.  But before going into production the hull was modified and developed to be one of the sweetest riding and handling hulls of the era.

Powered by a Holden 308 and driving through the new and inspired Gilflite soft-clutch, the Spitfire impressed me greatly.  Wound out, the hull returned a top speed of 52 mph at just 4700 rpm.   The riding attitude was sweet, the ‘screen’ a stunner … “it is indeed rare to test an inboard ski boat which has so few vices, yet so many attributes.”

Can you believe that the test rig was just $7825 on the trailer, turn-key?

Not long after this test was published, the magazine editor introduced an annual PowerBoat Magazine, boat testers Boat of the Year feature.  Each of the contributing journos had to nominate the boat, which impressed them the most over the preceding year of tests.  I had no hesitation in declaring the Gilflite Spitfire as my Boat of the Year.

In the day, PowerBoat magazine was a powerful medium for the powerboat market.   I’ve got no doubt that the test and then the Boat of the Year accolade contributed to the popularity and sales success of the Spitfire.   Much more significant to the success of the Spitfire though, was the simple fact that this was an exceptional ski boat and the boat buying public were smart enough to recognise it.

If only it still carried a price tag of $7825.

EAGLE-FLITE

Kellie and Katies ‘EAGLEFLITE’

Here’s a story about a new GILFLITE Shortline, a ballerina on ski’s, a teenager with a disability, AFL footy fans ‘Eagles supporters’, the love of water and the great outdoors and a name combination of notable relevance ……

In the words of Kellie – when it comes to boating and water skiing; “I was a late starter, got into it when I met new friends 10 years ago, learned to single ski at age of 35, I have always loved the outdoors; boating and camping. So the skiing scene was like a duck to water for me. I’ve been skiing with Show Ski WA for the past 2 years and my disabled daughter who ski’s with the WA disabled water ski division. My daughter Katie is 16, she lives with Angelman syndrome and loves the water and her ski life”.

It was a pleasure to deal with Kellie’s family and her parents during the build process of their Shortline. Working with them to achieve their personalised family sports/show boat was an enjoyable and exciting process with a very successful outcome. We like the name, ‘a notable combination of two passions’

We wish you all the very best and years of pleasure with your GILFLITE

SOUTHERN 80 (1984)

“For anyone who appreciates the thrill of victory and the sorrow of defeat”

A heart-felt story about a couple of thrillseekers and a GILFLITE Spitfire named ‘Animal’… with less than 10 minutes to go they’d be bathed in glory!

Written by: Mark O’Laughlin – circa 1984

From the GILFLITE Archives

PAGE 1 of 3 SOUTHERN 80 (1984)

PAGE 2 of 3 SOUTHERN 80 (1984)

PAGE 2 of 3 SOUTHERN 80 (1984)

PAGE 3 of 3 SOUTHERN 80 (1984)

PAGE 3 OF 3 SOUTHERN 80 (1984)
ANIMAL

“For anyone who appreciates the thrill of victory and the sorrow of defeat” A heart-felt story about a couple of thrill seekers and a GILFLITE Spitfire named ‘Animal’… with less than 10 minutes to go they’d be bathed in glory!

Written by: Mark O’Laughlin – circa 1984 From the GILFLITE Archives

GUTS & GLORY

CHAMPIONS NO MATTER WHAT!

“Water skiers always give it their best shot”

Stars Down Under Water Ski and Stunt Show Australia Day 2020

Above: Robert Dance ‘OAM’ driving the GILFLITE Integra – official tow boat

“Congratulations to Robert Dance, awarded the ‘Order of Australia Medal’ for his contribution to water skiing.

The GILFLITE Integra was the official tow boat for the ‘Stars Down Under Water Ski and Stunt Show’ where they performed at the ‘Festival of Sails’ at the ‘Royal Geelong Yacht Club’ for the biggest sailing regatta in the Southern Hemisphere held over the Australia Day long weekend 2020.

GILFLITE Integra: owned by Jan and Robert Dance (This Heirloom GILFLITE was custom built for Jan and her sister in June 1989). Jan absolutely loves the boat which shes has never a missed a beat in 30 years.

(photo’s courtesy R & J Dance S.D.U.W.S.S. fb page)
for more info check out … https://www.facebook.com/starsdownunderwaterskiandstuntshowteam/

JAYA


This picture was taken by a boating journalist during an offshore race
outside Sydney some decades ago.
Picture shows the Gilflite built offshore boat JAYA run by Colin Pratt in
very big swells which were the remains of a major offshore storm.

Jaya built by D Gill circa 1968 in the original GILFILTE factory – Vinter Ave, Croydon Vic

From Racing Boats to Diplomat and Royal adviser Mr Colin Pratt has enjoyed a colourful past and always lived life in the fast lane. Born in rural NSW during the great depression the interesting life that Colin Pratt would map out for himself would have been hard to imagine at the time. This future saw him become a member of parliament, a friend to the Cambodian Prince and amongst many professions a business-man in the marine industry designing and developing products and personally setting world records for 6 litre engines.

Here’s his story on JAYA THE GILFLITE built offshore boat run by Colin Prat

This picture was taken by a boating journalist  during an offshore race
outside Sydney some decades ago.
Picture shows the Gilflite built offshore boat JAYA run by Colin Pratt in
very big swells which were the remains of a major offshore storm.
In this race the Carr brothers, Val and Paul, were killed in the new
“Cigarette” which had been imported from the USA by Val.
This boat was about 34 foot long and powered by twin Mercruiser sterndrives
giving a speed up to 80mph plus in good conditions.
In this race the boat powering at top speed, ran down a large swell and
slammed into the near vertical face of the preceding wave causing instant
deceleration.
The short Car brothers were both slammed, face and chest against the
instrument panel causing deadly injuries.
The mechanic being taller went over the bow with broken ribs.
Being undamaged the “Cigarette” was bought by Sydney car dealer Arnold Glass
who was also known for his smaller circuit race boats. He raced it offshore
for a few years before selling to Norm Jenkins who also raced it. Probably
still around.

Story by Colin Pratt